Simatic Step7 Basic 10.5 SP2

Overview

TIA portal
Siemens.com

PLC S7 1200 is brand new of middle class of Siemens PLC, with compact design but more wide range application. This PLC has new class range between S7 200 and S7 300. New design of PLC and also Siemens made dedicated Operating Panel for this type of PLC.

TIA Portal V10.5 is one platform for programming PLC and also for programming a panel. One software covered all needs. This software supports PLC S7 1211C, S7 1212C, and S7 1214C. And also operating panel KTP400Mono 4″ , KTP600 Mono / PN 6″ , KTP1000 PN 10″, and KTP1500 PN 15″ .

This software has better graphical interface than Step 7 5.5 and easy to understand even you are new to this software. This TIA Portal made all setting, everything we do to build a project done in one window. Compare to Step 7 5.5 many windows to make a project, hardware configuration, communication setting, programming language, simatic manager, variable table, cross reference, etc. And TIA portal wanna make all simple.

This packet TIA portal consist of Step7 Basic 10.5 and WinCC Basic 10.5.

 

Screen Shots

Screen Shots

  • Front Page

TIA portal front page

  • Hardware Configuration

step7 10.5 hardware PLC

  • HMI Editor

step7 10.5 HMI screen editor

  • Programming Editor

step7 10.5 programming block

  • HMI panel supported

  •  PLC S7 Supported

supported PLC

Notes

Notes

System requirements for installation

The following table shows the minimum software and hardware requirements for installation of the “SIMATIC STEP 7 Basic” software package:

Hardware/Software

Requirements

Processor type

Pentium 4, 1.7 GHz or similar

RAM

Windows XP: 1 GB

Windows Vista: 2 GB

Free hard disk space

2 GB

Operating systems *

  • Windows XP (Home SP3, Professional SP3)
  • Windows Vista (Home Premium SP1, Business SP1, Ultimate SP1)

Graphics card

32 MB RAM

32-bit color depth

Screen resolution

1024 x 768

Network

10Mbit/s Ethernet or faster

Optical drive

DVD-ROM

For installing multiple siemens software, you must pay attention to this information bellow (see ReadMe file in this DVD), to prevent mall function of other error:

Parallel installation of STEP 7 V10.5 (incl. WinCC V10.5) has been released with

  • WinCC flexible 2008; WinCC flexible 2008 SP1
  • WinCC V6.2 as of SP3 (please read the information if you want to install WinCC V6.2 SP3 after STEP 7 V10.5).
  • WinCC V7

Parallel installation of STEP 7 V10.5 (incl. WinCC V10.5) is not permitted with

  • WinCC flexible 2004 and WinCC flexible 2004 SP1
  • WinCC flexible 2005 and WinCC flexible 2005 SP1
  • WinCC flexible 2007
  • All versions of WinCC prior to WinCC V6.2 SP2

Screen shot by ibudweb.com

7 thoughts on “Simatic Step7 Basic 10.5 SP2

  • April 13, 2012 at 8:38 pm
    Permalink

    Hi ibud,

    The software I wanted is as follows, Simatic WinCC, Step7 Professional and the Step7 Authorisation.

    Thanks for your help.

    Reply
    • April 14, 2012 at 5:12 am
      Permalink

      Dear cuzbell,
      for Simatic professional you can download here, for WinCC and authorization you can use existing links in my post.
      Regards.

      Reply
  • April 12, 2012 at 6:48 pm
    Permalink

    Why have you changed the download engine from FileFactory to Oron? I can’t complete my Step7 download now.

    Reply
    • April 12, 2012 at 8:27 pm
      Permalink

      Dear cuzbell,
      Sorry for that, may I know which software do you want to download. I’ll give you the links by email.
      regards

      Reply
  • Pingback: 2012 Engineers' Choice Awards - Siemens Win 2 Categories | iBudWeb

  • February 18, 2012 at 6:35 am
    Permalink

    Hi my name is hussein from iran I’m an Engineer.

    Reply
    • February 21, 2012 at 1:57 pm
      Permalink

      Dear Hussein
      Thanks for visiting my site
      Regards

      Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Please fill this box * Time limit is exhausted. Please reload the CAPTCHA.